“Should I get 3D letters or an LED sign?” is one of the questions we hear most often, and it’s a slightly misleading one. Most illuminated letters are 3D letters. The real decision is whether your sign needs to be lit at all, and if it does, how the light should work.
This guide sets out the differences in plain terms: what each option is made from, how it looks at night, what it costs, how long it lasts and whether you’ll need permission from Birmingham City Council. If you already know you want raised lettering, our 3D letter signage page covers the materials in more depth.
What is the difference between 3D letters and illuminated signs?
“3D letters” describes how a sign is built. “Illuminated” describes how it’s lit. The two overlap a lot.
3D letters, also called built-up letters or raised letters, are individual letters cut or fabricated from acrylic or metal and fixed to a fascia or wall, so each one stands proud of the surface. They catch daylight and throw a small shadow, which is why they look more expensive than a flat printed panel even from across the road.
An illuminated sign is any sign with its own light. That could be a lightbox, where the whole panel glows from behind; lit 3D letters; or an unlit sign with trough lights fixed above it. So the useful comparison is really three-way:
- non-illuminated 3D letters
- illuminated 3D letters (face-lit, halo-lit or both)
- a flat LED lightbox
What are 3D letter signs made from?
The material sets most of the budget and decides how long the letters last outside.
| Material | Typical life outdoors | Relative cost | Can it be lit? | Suits |
| Acrylic | 8 to 10 years | Lowest | Yes, any method | Most shop fronts; any colour, gloss or matt |
| Painted aluminium | 10 years or more | Middle | Yes | Large exterior letters and exact brand colours |
| Brushed or polished stainless steel | 15 years or more | Highest | Halo only | Premium shop fronts, receptions, clinics |
There are also two ways of building the letter. Flat-cut letters are cut from a single sheet, usually 5mm to 20mm thick. They’re cheaper and look sharp, but they can’t be lit from inside. Built-up letters have a separate face and a side wall, known as the return, which gives 30mm, 50mm or more of depth. That hollow body is where the LEDs go, so every internally lit letter is a built-up letter.
How can a 3D letter sign be lit?
| Lighting | How it works | Look at night | Relative cost | Often used by |
| LED lightbox | The whole panel glows from behind an acrylic face | Bright and very readable from a distance | Lower to middle | Takeaways, convenience stores, late-opening shops |
| Face-lit letters | Light shines through a translucent acrylic front on each letter | Letters glow, background stays dark | Middle to high | Shops that need to be seen from down the road |
| Halo-lit letters | LEDs point backwards, lighting the wall behind each letter | Dark letters outlined by a soft glow | High | Restaurants, salons, clinics, receptions |
| Face and halo | Both of the above in one letter | Most eye-catching | Highest | Flagship shop fronts |
| Trough lighting | A light bar above the sign washes it from the front | Whole fascia lit evenly | Lowest way to light a sign | Existing unlit signs, traditional shopfronts |
Which shop signs are visible at night?
In Birmingham it’s dark before half past four for most of December. If your busiest hours are in the evening, an unlit sign is invisible for a large part of the trading day unless the street lighting happens to fall on it.
For pure readability at a distance, face-lit letters and lightboxes win. The letter shape itself glows, so people can read your name from the far side of a dual carriageway. Halo lighting looks more refined, but because the letters themselves are dark, it reads best from closer in, on a pedestrian street or a short frontage. Trough lighting sits in between: it won’t stop traffic, but it makes sure an unlit fascia is seen.
Are LED shop signs worth the cost?
It depends on when your customers find you. A lit sign usually earns its keep when:
- you trade in the evening, as most takeaways, restaurants, late convenience stores and gyms do
- you’re on a main road where people pass by car and decide in a couple of seconds
- the street lighting outside your unit is poor
- you’re competing with lit neighbours on the same parade
If you close at 5pm and customers arrive by appointment, as many solicitors, accountants and opticians do, non-illuminated 3D letters are usually enough. The money is better spent on bigger, clearer lettering.
On cost, lighting is the biggest single jump in the price of a sign. One UK pricing guide puts an LED-lit sign at three to five times the price of an unlit one of the same size. Running costs are modest by comparison, since LED modules use far less power than the fluorescent tubes in older lightboxes, and a timer means the sign is only on when it’s useful.
Can 3D letters be fitted to an existing fascia?
Usually, yes, as long as the fascia is sound. What matters is what’s behind the surface.
Flat-cut and unlit built-up letters can be fixed with studs into the fascia, or held 20mm to 50mm off it on stand-off locators, which adds a sharp shadow line. On aluminium composite, timber and brick we use fixings suited to each material. If an old timber fascia is soft or full of holes, the better option is to clad it with a new aluminium composite panel and fix the letters to that.
Illuminated letters need a bit more planning. Each letter needs a small hole through the fascia for its cable, and the power supply has to sit somewhere dry that can still be reached later, often behind the fascia or just inside the shop. If you think you might want lighting in future, tell us now. Converting unlit letters later is rarely practical, whereas trough lights can be added at any point.
How long do illuminated shop signs last?
The letters themselves last as long as the material: around 8 to 10 years for acrylic outdoors, and 15 years or more for stainless steel.
The LEDs are rated separately. Sign module manufacturers commonly quote a life of around 50,000 hours to “L70”, the point where the light has dropped to 70% of its original brightness. Run for 12 hours a day, that’s roughly 11 years. In practice the power supply (the driver) is a separate part and is often the first component to need replacing. A well-built sign lets you change it without taking the letters down, which is worth asking about when you compare quotes.
Do illuminated signs need planning permission?
Often, yes. The Planning Portal says most illuminated signs need advertisement consent from the council. Signs where only the letters are lit, rather than the whole panel, are treated more leniently and may not need an application, but the conditions are detailed and depend on where your shop is.
Birmingham’s 29 conservation areas, including the Jewellery Quarter and Moseley, get more scrutiny of lighting than most streets. Listed buildings need listed building consent on top. The application fee for a sign relating to your business is £174, and the council should decide within eight weeks of accepting the application.
Raise it when you ask for a quote rather than the week before you open. We’ll tell you whether your design is likely to need consent and supply the visual and dimensions you’ll need for the form. Our guide to shop front signage costs in Birmingham covers the consent rules in more detail.
A quick way to decide
| Your situation | What we’d usually suggest |
| Takeaway or convenience store open late on a main road | LED lightbox or face-lit letters |
| Restaurant, salon or clinic that wants a premium look | Halo-lit acrylic or stainless letters |
| Office, solicitor or showroom open in daylight | Non-illuminated 3D letters, sized generously |
| Conservation area or listed building | Unlit letters or trough lighting, checked with the council first |
| Tight budget but you need to be seen at night | Unlit sign with trough lights, or re-skin an existing lightbox |
One sizing rule applies to all of them. A common trade rule of thumb is about 25mm of letter height for every 3 metres of viewing distance, so 250mm letters read comfortably from around 30 metres away.
How we make and fit 3D and illuminated signs
Everything is made in our Bordesley Green workshop and fitted by our own team, including the electrical connection for illuminated signs. You send us the fascia or wall width, a photo and your logo. We send back a quote and a mock-up showing the letters at actual scale on a photo of your building, and revise it until you’re happy. Manufacture typically takes 2 to 5 working days, and most single shop fronts are fitted in a day.
We’ve been working with UK businesses for more than 20 years and cover Birmingham and the West Midlands. For other raised and flat options, see our acrylic and metal signs and shop front signage pages.
Frequently asked questions
Can halo-lit letters go on a brick wall?
Yes. The letters are mounted on stand-off locators that hold them 20mm to 50mm off the brick, which creates the gap the light needs. Brick actually shows a halo glow well because of its texture.
Can I add lighting to my 3D letters later?
Not easily. Lit letters are built differently from unlit ones, so adding LEDs afterwards usually means new letters. Trough lights can be added over an existing sign at any time, which is the practical route if you change your mind.
Are acrylic or metal letters better?
Neither is better in every case. Acrylic costs less, comes in any colour and can be lit in any style. Stainless steel lasts longer and has a look acrylic can’t copy, but it can only be halo-lit.
Do 3D letters need advertisement consent?
Unlit letters on your own business premises often have deemed consent, provided they meet the conditions on height and size. Illuminated letters, signs above first-floor window level and signs on listed buildings usually need an application.
Get a visual of your sign
Send us a photo of your fascia or wall and your logo, and we’ll show you lit and unlit options side by side with a fixed price for each. New business? Ask about 10% off your first signage order.
- Call 0121 707 1333
- WhatsApp 07816 493237
- Email info@britanniaprint.co.uk or use our contact page
- Visit 73 Lower Dartmouth St, Bordesley Green, Birmingham B9 4LA (Monday to Saturday, 10am to 6pm)
Sources
- Planning Portal: Advertisement consent
- VisitBritain: Signs for your premises (illuminated and partially illuminated signs)
- Goodspeed: Custom Signage Cost UK 2026
- Example LED sign module specification showing a 50,000-hour L70 rating
- Birmingham City Council: Conservation areas in Birmingham








